FREE SHIPPING — BioPro 380 Biodiesel Processor, Model# ADBP-380
BioPro Automated Biodiesel Processor is a stainless steel
industrial-grade processor that converts organic oils into an
alternative fuel — biodiesel — through acid/base catalyzed chemical
reactions. The oil is altered to allow it to run efficiently in an
unmodified diesel engine. The BioPro 380 is designed for self-contained
operation, with very little user interaction: no metering or mixing
chemicals. Simply add the required ingredients, press the Big Green
Button and walk away. The oil can be any organic oil (tallow, fats,
vegetable oil, etc.), but in most cases, waste vegetable oil is commonly
used to make biodiesel due to its wide availability. U.S.A.
- Construction: Welded 304 stainless steel body; powder-coated
carbon steel covers
- Fittings: 304 stainless steel or glass-filled polypropylene
- Controls: AUTO mode controlled by program logic
controller; Start button initiates completely automated
process; Manual mode controlled by switch actuation
- BioPro 380 capacity: 100 gallons of oil yields 100 gallons of
fuel; 20 gallons of methanol yields approximately 20 gallons of
glycerin
- Electrical: 110V AC/ 15 Amp & 220V AC 30 Amp circuit
- Wash method: Three-stage water wash — spray wash followed by two
turbulent washes
- Automatic removal of waste water
- Footprint dimensions: 64in.W x 34in.D x 80in.H
- Minimum Requirements:
- 50, 75 or 100 gallons of new or used vegetable oil, depending on
batch size selected
- 20 gallons of methanol (commonly available as racing fuel for
alcohol dragsters)
- Lye or caustic potash
- 93% pure or better sulfuric acid (not battery acid)
- Approximately 100 gallons of fresh water or pressurized source
of fresh water, as from a garden hose
- Total Time: Approximately 48 hours from start to finish
- Includes rubber gloves, protective goggles, vinyl apron,
respirator
|
